I have a Badger 350, and rather than run a compressor I want to use the spare tire adaptor and run the air brush off a portable air tank. Has...
What a brilliant idea. I'm in the midst of building a control panel on a sheet of lexan, and have not been able to find a suitable tape anywhere....
Good suggestion Kyle, thanks. My intention was to use a transformer to supply power to just the turnouts and perhaps layout lighting. Clearly I...
I converted some of those old Tyco and Mantua cars a few years back, but I agree it's hardly worth it in time or money nowadays with the selection...
So, when is 16 volts not 16 volts? Problem solved guys, and thanks for helping me eliminate the possibles and drill down to the obvious!! After...
Sorry if I confused you there. The turnout worked fine on the layout, manually. But it won't work using the motor. I've tried it both on the...
I'm using the 16V AC outlet on a transformer, and Atlas #56 switch control, just as I do with my Atlas turnouts. The Peco instructions are pretty...
Even having dismounted the turnout from the layout and holding it in my hand, the motor still cannot move the linkage. There was no problem or...
I'm using the Peco PL-10 motor for the Peco turnout.
Thanks for the welcome guys. I've re-posted my question on the HO thread.
Trying to install a Peco PL10 switch machine motor to a Peco wye. The turnout works fine by hand, the motor works when powered up, but when I...
This looks like a great forum for discussing all aspects of model railroading. Wish I had found it sooner. My first reason for being here is that...
