I would recommend you post this question on the dccex discord channel they answer sometimes within minutes! I don`t know the technical part of...
Hello Fred I found the issue by looking in the serial monitor it showed I2C devices at 0x27 my lcd display and 0x42 the pca9685 I was using. I...
I have figured it out the main issue I had was the pca9685 was set to address 0x42 and it wasnt being used to drive the servo`s by dcc++ex once I...
Hello everyone I know this is a question probably asked but search didn`t reveal the answer I needed. I am setting up a small N scale layout and...
Here are the links to the items I use the wire https://www.amazon.com/gp/product/B073R6C1L8/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 the...
I have had to make extensions for airplanes and now model railroading get a good crimper set and a connector set for three wire servo connectors...
I am using my printers and K40 laser in the basement with ventilation going out thru a 6 inch blower. I have 3 anet A8 plus and now the anycubic...
I kinda figured that the ease of mounting and wiring made you use the 6600. I have been using the A4988 for my projects that use a stepper because...
Hi Sumner Great work on your turntable and controls!!! If I may ask why did you use the tb6600 driver instead of an A4988 etc?
If you are using JMRI/CMRI look at little wicket railways video series his videos make it very easy to get all kinds of things going thru JMRI/CMRI
I was using a laptop from 2008 for my layout until it died now I`m using a desktop from 2016. The main thing about using older computers is...
I dont know how you control you turnouts or other items on your layout now but you would probably have to buy turnout controllers IE...
use double stick tape to position your servo mount then put screws in that way it is mounted solidly
I tried to download too not going to use it because I have tablets but the link gives 404 error
I saw Jimmy`s video on this its a something in the future do for me right now thanks for the very nice write up !!!!!!!!!!!
I must have had something wrong with the first bodnar sensor I built. I have built a couple more and all have worked great as soon as a loco is...
I held the resistor down with my finger tips plus rubbed it up and down the peice of track i was testing on just to make sure there was no...
Hello Everyone As the title asks is anyone using the dave Bodnar design for a CT current sensor? I have built one of his circuits and it works...
Hello Everyone And FlightRisk After seeing your post I looked at my lcd and see that it is v2.1.3 . He states in his git hub that you helped to...
I found A download from somebody on the forum that includes the loco # power, on /off ,speed and direction. I installed it and it shows all the...
