Hi Programming is kind of like the C language family. There are some special characters that you have to keep track of, but it is pretty simple....
You can program this pretty easily. You will need a small amplifier and speaker, of course. I use Azatrax shield sensors to trigger lights and...
Yeah, like that! :LOL:
And here are the parts after painting. I might add some corrosion to the chillers?? [ATTACH]
The best way is as Bob B mentioned- scrape the enamel off. I use a lot for guitar coil winding, and the best method is to scrape. Be careful...
I had the same problem- cannot find the USB port. I gave up and put efforts into new sound decoders and 3D printing...
Thanks, it was fun to make them. I added stuff to the roofs as you noted, too.
Hi Here is a picture of the as-grown designs. Not yet painted... Sorry my lighting is a bit directional... [ATTACH] Here is a picture showing...
Hi to all I saw some rooftop A/C stuff online, decided to make my own designs. There are 2x2 ducts, 3x3 ducts, 4 ton A/C units and commercial...
Just bang the pliers on a vise or other non-yielding surface. You may have to do this a number of times. Another way is to take a bar magnet,...
Yep, I use paint filters and coffee filters to strain the resin. I get 99% isopropyl in gallons- good for cleaning glasses, too. I do not use...
You can get spare blades on ebay- cheap! I use this for cutting fabric for guitar amp coverings, too. It will score thicker plastic sheeting...
I reuse the bottom trays from ESU decoders. Keeps all of the parts in one place during disassembly and reassembly. Hope you find it...
Whoops, misspelled AJ Kochev. My humblest apologies, AJ. You do GREAT work!
HI TO ALL- Price reduced to $15 for everything. Thanks!
Here is a conversion from the 2 PCB light boards (or TCS CN-GP) to an ECS LokSound 58923.. Takes a little bit of machining. You can do it with a...
I painted the stop lights red, the headlights silver, running lights and turn signals orange, and bumpers silver or left them black depending on...
Yep. In my grad school days I did a lot of milling. Of course, this was big stuff. I may take a look. Thanks for the thought! JP
I got the same buses last year. Did some detailing. I added a bus station to the city square. Have fun!
Two other solvents- MEK + acetone for gluing most types of plastic. I mix my own in ~50:50 ratio- store is a tightly sealed glass bottle as MEK...
