I can just say, I dont like. Too much informations (on the right) that is not interesting me, and the important stuff is compressed to the minimum...
The advice with the brushes are very right. If you buy any new, it is important to buy the version corresponding to your motor, 3pol or 5pol. If...
For the people that have access, there is a new glue that I use now for most application, "Uhu Strong&Safe" It is the best glue that I have tested...
The unique reverse voltage coil of the Rokuhan is very sensitive to over-voltage. I run them with only 7,5Volt and impulse limited to 0,3 seconds....
1785, I have. The main difference of the 2 versions was the oil tender. [ATTACH]
Finally everything connected and working fine. Its already much less messy inside. [ATTACH] So I finished the Kit today. [ATTACH] [ATTACH]...
If you want to be prototypical in Z, you must throw away most of the steamers, but anyway I would never modify my Moguls, the effect would be not...
Replacing the connector on the EL-Inverter board was the easiest way to fix the new Atmel board piggyback on it, as volume is limited. Just to...
In between I finished the Avr-Program and if you could use it for other purpose (as Christmas tree illumination) :) you have it here. [ATTACH]...
Another interesting voltage regulator is the MC33375D, not so easy to find but having as big advantage a Control ON/OFF input Pin. I have the 2,5...
Today I arrived to work a little on the "Stripgate", I fixed all the illuminations. Four should be enough for the moment to loose the overview....
Hi Kim, good to hear from you. I suppose that job also takes you some of your precious Z time away. After all this years I always appreciate to...
Ok John, but I dont arrive to delete the attachement, perhaps you could do it. Anyway, I cannot understand because also in the States, kids run...
Roxanne, haha, thats funny :cute: I have even a picture from her, because as last thing yesterday I redecorated the front windows. So, to avoid...
Next light story are the "working room(s)" Some windows should be illuminated by discret light, very apart from the rest of the rooms. To...
Coming to the light story, I couldnt use the planed 5mm led for the illuminated sign, there is no place. I found some time ago a thin foil with 5...
But it was still hudge and "Paradice Club" was not the desired name for the new business. Even when the transparent part is cut out, it wouldnt...
For Joe it was a disaster. After the visit of this japanese tourist group that was taken out for hospital, nobody of his usual guests visit him...
I use in general first a micro-drop of super-glue on the end of a needle to fix all parts =< 0603. This works very good and when you solder it...
Hello, I would ask if it is not opportune to open a t-gauge forum at trainboard ? There are some railroaders in the scale and the former...