I used foam adhesive caulk to secure the foamboard and to seal the swamp basin.
I lined the swamp base with foamboard.
I carved the swamp with a pocket knife, disposable utility knife and a sureform rasp.
The ditch will widen here and a trestle and small bridge will cross the ditch. I used foamboard to build-up the base of the ditch. The foam board...
The ditch will widen here and a trestle and small bridge will cross the ditch. I used foamboard to build-up the base of the ditch.
I used a pocket knife, a disposable utility knife and a sureform rasp to shape the ditch.
I bought a package of Model Power cork roadbed on clearance. Oddly enough it is only 1" wide as opposed to Midwest roadbed which is 1...
I used 2" screws with fender washers to hold the foam down to the frame while the glue was drying. I can easily fill the divets with wood...
I found theese brass handles at the Habitat for Humanity store in Seattle. They cost $2 for 4 handles. It definitely helps to have something to...
I cut and gouged out the basin for the swamp here. I used other scraps of foam to make some low hills around the swamp, adding to the...
Celluclay to fill cracks and crevices and modify surface of styrofoam terrain base.
Layers of styrofoam glued together.
Sprinkle ground foam. Add trees and serve.
Using layers of styrofoam.
I used Sculpt-a-mold to smooth out the contours.