These are 2 of the finished signals after painting and addition of 3D printed targets.
Hello guys Can someone tell me how true to scale the tichy trains traffic signs are? I am particularly interested in the cross bucks (2622)....
Richard Porter from Peninsula Ntrak was part of our AsiaNrail crew at the 2011 National Train Show held in Sacramento, California.
Phillip Cook from the Japan Rail Modelers of Washington DC was part of our AsiaNrail crew at the 2011 National Train Show held in Sacramento,...
The smaller of the 2 Carlin sections has had the river cut into it and sealed with paint.
Hi, my name is Mark. I'm originally from Kentucky but live in Chicagoland. I'm a Senior Programmer/Analyst at a regional medical center in the...
Hello, My name is Tom. I am a 73 year old disabled Veteran. I served in Viet Nam in 1970. I have taken up model trains to fill my time and have an...
This shows the size of the LED and the connections.
Magnet wire is soldered to the pads on the LED as shown. Note that two pads on one side are connected together.
4 more single head searchlight signals were built and added to the layout along with 2 detection blocks. Line poles now extend over the entire...
During the summer of 2020 I began to make some of my own signals. These are made of brass with 3D printed targets. The LED's are green / red...
Reflective tape and bright red LED's are added to the gate to prevent accidents. The LED's turn on whenever the gate is lowered and shut off...
When completed this bridge will be used in the next expansion of the layout on the east side of the Palisade tunnels.
I dont have a ton of space but I designed a layout and needed some feedback. N scale Coal and intermodal layout designed to have some small yard...
Micro-Trains flat car with a pair of PnP Trains M2 Bradley IFV's chained down with Clover House chain.
This is another Micro-Trains flat car that I painted and then lettered for a TTX flat car that I saw in a photo. The trailers were stock from...
This was from a 3D printed kit. The red cross was made from masking and spraying a white square then adding red stripe decals.
