I bought a digitrax Super Empire builder for use on an "N" scale layout the is under construction. I have two locos that are decoder equiped, a Trainmaster and a Baldwin switcher. I have yet to hook the system up. Anyone out there have any feedback on this system ? thanks, Jim
Welcome to TrainBoard I used a Super Chief with DT400 controller at a show and liked it. I had read that the Super Empire Builder cannot read CVs? Here is the info about it copied form Tony's Trains website: PLEASE NOTE: If you are planning to use Sound decoders, do Consisting or use Helper Services or Install Decoders yourself, we strongly recommend you consider the SUPER CHIEF which has the important Decoder Read-Back capability on the Program Track Circuit that is lacking on the Super Empire Builder. This feature allows you to READ the settings in the decoder so that you are not 'programming in the dark'. It also allows you to test your Decoder Installation without putting the Decoder at RISK. LINK HERE: http://www.tonystrains.com/products/digitrax_stsets.htm
I bought a Digitrax Zephyr DCS50 last weekend for running my DCC equipped LEGO trains. I had previously been using a MRC Commander 2000 with various MRC decoders. The ability to read CVs in various modes has already proved invaluable but not before I had destroyed one decoder looking for a hardware fault.:sad:
John: That's happened to all of us in regards to a burnt out decoder. Have fun with DCC. Stay cool and run steam......
John, Don't feel bad. Like Powersteamguy said, it happens to all of us. Let me warn you that this won't be your last! I fried one just last week. You may want to buy decoders from companies that offer a goof proof warranty. I know TCS has that arrangement and I *think* Lenz too. The one I fried last week I sent back to TCS and they gave me a brand new one. Nice! Think it the $$ lost as an educational fee.
Lenz will replace any malfunctioning decoder or decoder that's been burnt out no questions asked. They will not charge you for a replacement. That is their policy. Stay cool and run steam.....
There are several ways to burn out a decoder. One major way is not properly isolating the decoder from the loco frame. Incorrect wiring can also blow a decoder. A voltage overload due to a major short circuit can also blow out a decoder. if your command station doesn't have a circuit breaker in case of a short, decoders can burn out. Stay cool and run steam....