Hey guys, I stumbled on a solution to a nagging problem I always had with the DT300 throttle. When I would advance the throttle knob quickly, sometimes the value would go down instead of up. For instance, the loco is running at 35, I turn the knob quickly shooting for 50, and instead it goes down to 15, or worse 0. Turning off the beeps solves this problem. Evidentally the throttle cannot not keep pace with the knob turning AND beep at the same time. Please see my other post "Turning Off Throttle Beeps" for the fix. I confess I'm a little excited this fixed the problem! It was quite annoying [ 24. October 2002, 15:35: Message edited by: Pete ]